작동 원리 및 구조
The battery supplies the load divided by the inverter efficiency, plus the inverter idle consumption. Divide the usable battery energy (voltage × Ah × depth of discharge) by that power to get the runtime. The tool also gives the DC current and an inverter size that keeps the load under 80% of its rating.
단계별 사용 방법
Enter the AC load in watts and the inverter efficiency and idle draw.
Enter battery voltage, capacity and usable depth of discharge.
Read the runtime, battery current and suggested inverter size.
주요 기능 및 장점
- Runtime in hours and minutes
- DC current warning for heavy loads
- Idle consumption included
- Suggested inverter rating
계산 방식, 공식 및 기술 표준
Battery power = load ÷ efficiency + idle. Runtime = V × Ah × DoD ÷ battery power.
입출력 예시 및 엣지 케이스
600 W on 12 V 100 Ah
90% efficient, 80% DoD
About 1 h 24 min
제한 사항 및 정확도 안내
- • Cold, ageing and high discharge rates reduce real capacity, especially for lead-acid.
- • Surge power at start-up is not modelled.
브라우저 로컬 처리 및 개인정보 보호
일반 웹 변환기는 문서나 미디어 파일을 원격 서버에 업로드합니다. 인버터 부하 및 배터리 사용시간 계산기 도구는 현재 브라우저 탭 내부에서만 실행됩니다:
입력 텍스트와 파일은 외부 서버로 전송되지 않고 기기 내에서 로컬로 계산됩니다.
도구에 붙여넣은 파일이나 데이터를 서버에 기록하거나 저장하지 않습니다.
작업 결과는 브라우저 탭 메모리에만 유지되며 탭을 닫거나 초기화하면 즉시 해제됩니다.
자주 묻는 질문 (FAQ)
What depth of discharge should I use?
About 50% for lead-acid and 80–90% for LiFePO4.
Why is the battery current so high?
A 12 V system draws about 8 A for every 100 W; use heavy cable and a fuse.
Is my data sent anywhere?
No.