Microdeck.tools 100 % en el navegador

Calculadora de Autonomía de Inversor y Batería

New

Calcula el tiempo de respaldo de un inversor solar o UPS según la capacidad de la batería en Ah, voltaje y consumo en vatios.

100 % en tu navegador Sin subir archivos Resultados al instante

¿Te ahorró tiempo esta herramienta? Ayuda a mantener Microdeck gratis y al día. Opcional · Desde $3.

Cómo funciona por dentro

The battery supplies the load divided by the inverter efficiency, plus the inverter idle consumption. Divide the usable battery energy (voltage × Ah × depth of discharge) by that power to get the runtime. The tool also gives the DC current and an inverter size that keeps the load under 80% of its rating.

Instrucciones paso a paso

1

Enter the AC load in watts and the inverter efficiency and idle draw.

2

Enter battery voltage, capacity and usable depth of discharge.

3

Read the runtime, battery current and suggested inverter size.

Funciones principales y ventajas

  • Runtime in hours and minutes
  • DC current warning for heavy loads
  • Idle consumption included
  • Suggested inverter rating

Metodología, fórmulas y estándares técnicos

Battery power = load ÷ efficiency + idle. Runtime = V × Ah × DoD ÷ battery power.

Ejemplos prácticos y casos límite

600 W on 12 V 100 Ah

Entrada
90% efficient, 80% DoD
Salida
About 1 h 24 min

Límites y notas de precisión

  • • Cold, ageing and high discharge rates reduce real capacity, especially for lead-acid.
  • • Surge power at start-up is not modelled.

Procesamiento local en tu navegador y privacidad

Los conversores tradicionales suben tus documentos, textos o archivos multimedia a servidores remotos. Calculadora de Autonomía de Inversor y Batería se ejecuta dentro de tu pestaña:

Procesado en esta pestaña

Tus textos y archivos se procesan localmente sin enviarse a ningún servidor externo.

Sin registro de tus archivos

Microdeck no guarda ni registra el contenido que introduces en las herramientas.

Memoria temporal de la pestaña

Los resultados permanecen en la memoria de tu navegador y se liberan al cerrar o reiniciar.

Preguntas frecuentes (FAQ)

What depth of discharge should I use?

About 50% for lead-acid and 80–90% for LiFePO4.

Why is the battery current so high?

A 12 V system draws about 8 A for every 100 W; use heavy cable and a fuse.

Is my data sent anywhere?

No.

Explora herramientas relacionadas

Apoyar a Microdeck

Totalmente opcional · Desde $3 · Sin cuenta

Elige un importe (USD):Seleccionado:$5

El aporte mínimo es de $3 USD.

Totalmente opcional · Desde $3 · Pago seguro en Gumroad.