Microdeck.tools 100% ブラウザ完結

インバーター負荷・バッテリー稼働時間計算機

New

停電対策や車中泊、太陽光発電におけるインバーターのバッテリー稼働時間(放電深度DoD・変換効率を考慮)を算出します。

100% ブラウザ完結 サーバー送信なし 即時処理

このツールは作業時間の短縮に役立ちましたか? Microdeckの無料運営と継続開発への応援(任意・$3〜)。

仕組みと内部処理

The battery supplies the load divided by the inverter efficiency, plus the inverter idle consumption. Divide the usable battery energy (voltage × Ah × depth of discharge) by that power to get the runtime. The tool also gives the DC current and an inverter size that keeps the load under 80% of its rating.

使い方ステップ

1

Enter the AC load in watts and the inverter efficiency and idle draw.

2

Enter battery voltage, capacity and usable depth of discharge.

3

Read the runtime, battery current and suggested inverter size.

主な機能と特長

  • Runtime in hours and minutes
  • DC current warning for heavy loads
  • Idle consumption included
  • Suggested inverter rating

計算ロジック・仕様・技術基準

Battery power = load ÷ efficiency + idle. Runtime = V × Ah × DoD ÷ battery power.

入出力の例・エッジケース

600 W on 12 V 100 Ah

入力
90% efficient, 80% DoD
出力
About 1 h 24 min

仕様上の制限・精度に関するご注意

  • • Cold, ageing and high discharge rates reduce real capacity, especially for lead-acid.
  • • Surge power at start-up is not modelled.

ブラウザ内ローカル処理とプライバシー保護

一般的なWebツールは文書やメディアを外部サーバーへ送信します。インバーター負荷・バッテリー稼働時間計算機 はお使いのブラウザタブ内のみで完結します:

このタブ内で処理完結

入力テキストやファイルは端末内で処理され、外部の処理サーバーへアップロードされません。

入力データのログ保存なし

作業内容や貼り付けたデータを保存・記録しません(通常の静的配信CDNリクエストのみ発生します)。

タブ単位の一時メモリ管理

作業データはタブ内のメモリ上のみに保持され、リセットまたはタブを閉じると破棄されます。

よくある質問 (FAQ)

What depth of discharge should I use?

About 50% for lead-acid and 80–90% for LiFePO4.

Why is the battery current so high?

A 12 V system draws about 8 A for every 100 W; use heavy cable and a fuse.

Is my data sent anywhere?

No.

関連するマイクロツール

Microdeckを応援する

完全任意 · $3から · アカウント登録不要

金額を選択 (USD):選択中:$5

最小金額は $3 USD です。

完全任意 · $3から · Gumroadの安全な決済ページが開きます。