底層運作原理
Total dynamic head is the static lift plus the friction loss plus the pressure needed at the outlet, expressed in metres. Hydraulic power is density × g × flow × head. Dividing by the pump and motor efficiencies gives the shaft and electrical power, and the tool suggests the next standard motor size with a 20% margin.
詳細操作步驟
Enter the flow, static lift and friction loss.
Add the outlet pressure and efficiencies.
Read total head, power in kW and hp, and the suggested motor.
核心功能與效能優勢
- Head in metres and bar
- kW and hp
- Standard motor sizes
- Specific gravity input
運算方法、公式與技術標準
P(hydraulic) = ρ·g·Q·H. Shaft power = hydraulic ÷ ηpump. Input = shaft ÷ ηmotor.
實作範例與邊界案例
120 L/min, 25 m lift, 5 m friction
Efficiency 60% / 85%
About 0.98 kW shaft; a 1.5 kW motor suggested
使用限制與精準度說明
- • Check the pump curve and NPSH; this is a sizing estimate.
- • Suction lift is limited by atmospheric pressure.
瀏覽器本地運算與隱私保障
傳統線上轉換網站會將您的文件、文字片段或影音檔案上傳至遠端伺服器。水泵總揚程與電機功率計算器 完全在您的瀏覽器分頁內運行:
您的檔案與文字都在裝置本機計算,不會傳送內容至任何後端伺服器。
Microdeck 不會記錄或儲存您在工具內貼上的任何檔案或程式碼。
所有暫存結果僅存在目前分頁記憶體中,重設或關閉分頁後即刻清除。
常見問題 (FAQ)
What efficiency should I use?
Small centrifugal pumps are often 40–65%.
Does it include pipe friction?
Enter it yourself, for example from the pipe friction loss calculator.
Is data uploaded?
No.