仕組みと内部処理
Total dynamic head is the static lift plus the friction loss plus the pressure needed at the outlet, expressed in metres. Hydraulic power is density × g × flow × head. Dividing by the pump and motor efficiencies gives the shaft and electrical power, and the tool suggests the next standard motor size with a 20% margin.
使い方ステップ
Enter the flow, static lift and friction loss.
Add the outlet pressure and efficiencies.
Read total head, power in kW and hp, and the suggested motor.
主な機能と特長
- Head in metres and bar
- kW and hp
- Standard motor sizes
- Specific gravity input
計算ロジック・仕様・技術基準
P(hydraulic) = ρ·g·Q·H. Shaft power = hydraulic ÷ ηpump. Input = shaft ÷ ηmotor.
入出力の例・エッジケース
120 L/min, 25 m lift, 5 m friction
Efficiency 60% / 85%
About 0.98 kW shaft; a 1.5 kW motor suggested
仕様上の制限・精度に関するご注意
- • Check the pump curve and NPSH; this is a sizing estimate.
- • Suction lift is limited by atmospheric pressure.
ブラウザ内ローカル処理とプライバシー保護
一般的なWebツールは文書やメディアを外部サーバーへ送信します。揚水ポンプ全揚程・所要動力計算機 はお使いのブラウザタブ内のみで完結します:
入力テキストやファイルは端末内で処理され、外部の処理サーバーへアップロードされません。
作業内容や貼り付けたデータを保存・記録しません(通常の静的配信CDNリクエストのみ発生します)。
作業データはタブ内のメモリ上のみに保持され、リセットまたはタブを閉じると破棄されます。
よくある質問 (FAQ)
What efficiency should I use?
Small centrifugal pumps are often 40–65%.
Does it include pipe friction?
Enter it yourself, for example from the pipe friction loss calculator.
Is data uploaded?
No.