작동 원리 및 구조
Total dynamic head is the static lift plus the friction loss plus the pressure needed at the outlet, expressed in metres. Hydraulic power is density × g × flow × head. Dividing by the pump and motor efficiencies gives the shaft and electrical power, and the tool suggests the next standard motor size with a 20% margin.
단계별 사용 방법
Enter the flow, static lift and friction loss.
Add the outlet pressure and efficiencies.
Read total head, power in kW and hp, and the suggested motor.
주요 기능 및 장점
- Head in metres and bar
- kW and hp
- Standard motor sizes
- Specific gravity input
계산 방식, 공식 및 기술 표준
P(hydraulic) = ρ·g·Q·H. Shaft power = hydraulic ÷ ηpump. Input = shaft ÷ ηmotor.
입출력 예시 및 엣지 케이스
120 L/min, 25 m lift, 5 m friction
Efficiency 60% / 85%
About 0.98 kW shaft; a 1.5 kW motor suggested
제한 사항 및 정확도 안내
- • Check the pump curve and NPSH; this is a sizing estimate.
- • Suction lift is limited by atmospheric pressure.
브라우저 로컬 처리 및 개인정보 보호
일반 웹 변환기는 문서나 미디어 파일을 원격 서버에 업로드합니다. 양수 펌프 전양정 및 소요 동력 계산기 도구는 현재 브라우저 탭 내부에서만 실행됩니다:
입력 텍스트와 파일은 외부 서버로 전송되지 않고 기기 내에서 로컬로 계산됩니다.
도구에 붙여넣은 파일이나 데이터를 서버에 기록하거나 저장하지 않습니다.
작업 결과는 브라우저 탭 메모리에만 유지되며 탭을 닫거나 초기화하면 즉시 해제됩니다.
자주 묻는 질문 (FAQ)
What efficiency should I use?
Small centrifugal pumps are often 40–65%.
Does it include pipe friction?
Enter it yourself, for example from the pipe friction loss calculator.
Is data uploaded?
No.