Microdeck.tools 100% 瀏覽器本地執行

樓梯踏步與樓梯縱梁計算器 (級高與踏深)

New

依據人體工學步幅公式 (2R + T = 60~64 cm) 及建築規範,自動試算樓梯級數、階高、踏面寬度、樓梯坡度角與斜梁總長。

100% 瀏覽器本地執行 不上傳至伺服器 即時顯示結果

這個工具替您省下寶貴時間了嗎? 歡迎自願贊助,協助 Microdeck 維持免費與穩定運作 · 最低 $3 起。

底層運作原理

The total rise is divided into equal risers close to your target height. The number of treads is one less, so the run is treads times tread depth. The stringer length comes from the right triangle, and the tool checks the common comfort rule 2 × riser + tread against 600–650 mm.

詳細操作步驟

1

Choose mm or inches.

2

Enter the total rise and your target riser and tread.

3

Optionally enter the tread thickness.

4

Read the steps, run, stringer length and warnings.

核心功能與效能優勢

  • Millimetres or inches
  • Comfort and code guidance
  • First riser correction

運算方法、公式與技術標準

Risers = round(rise ÷ target riser); run = (risers − 1) × tread; stringer = √(rise² + run²).

實作範例與邊界案例

2700 mm rise

輸入
180 mm riser, 260 mm tread
輸出
15 risers, 3640 mm run

使用限制與精準度說明

  • • Codes differ by country; confirm with local rules.
  • • Does not size the timber.

瀏覽器本地運算與隱私保障

傳統線上轉換網站會將您的文件、文字片段或影音檔案上傳至遠端伺服器。樓梯踏步與樓梯縱梁計算器 (級高與踏深) 完全在您的瀏覽器分頁內運行:

於此分頁本地處理

您的檔案與文字都在裝置本機計算,不會傳送內容至任何後端伺服器。

絕不記錄操作內容

Microdeck 不會記錄或儲存您在工具內貼上的任何檔案或程式碼。

分頁記憶體即時釋放

所有暫存結果僅存在目前分頁記憶體中,重設或關閉分頁後即刻清除。

常見問題 (FAQ)

Why one fewer tread than risers?

The top floor acts as the last tread.

What is the 2R + T rule?

Twice the riser plus the tread should be about 600–650 mm.

Is data uploaded?

No.

探索相關微型工具

支持 Microdeck

完全自願 · $3 起 · 免註冊帳號

選擇金額 (USD):已選金額:$5

單次最低贊助金額為 $3 USD。

完全自願 · $3 起 · 將透過 Gumroad 安全結帳頁面完成。