Microdeck.tools 100% ブラウザ完結

階段設計・ささら桁(Stringer)計算機 (蹴上・踏面)

New

階高(総高さ)から建築基準法および歩幅公式(2R + T = 60〜64cm)に基づく最適段数、蹴上げ寸法、踏面寸法、ささら桁の部材長と傾斜角を計算します。

100% ブラウザ完結 サーバー送信なし 即時処理

このツールは作業時間の短縮に役立ちましたか? Microdeckの無料運営と継続開発への応援(任意・$3〜)。

仕組みと内部処理

The total rise is divided into equal risers close to your target height. The number of treads is one less, so the run is treads times tread depth. The stringer length comes from the right triangle, and the tool checks the common comfort rule 2 × riser + tread against 600–650 mm.

使い方ステップ

1

Choose mm or inches.

2

Enter the total rise and your target riser and tread.

3

Optionally enter the tread thickness.

4

Read the steps, run, stringer length and warnings.

主な機能と特長

  • Millimetres or inches
  • Comfort and code guidance
  • First riser correction

計算ロジック・仕様・技術基準

Risers = round(rise ÷ target riser); run = (risers − 1) × tread; stringer = √(rise² + run²).

入出力の例・エッジケース

2700 mm rise

入力
180 mm riser, 260 mm tread
出力
15 risers, 3640 mm run

仕様上の制限・精度に関するご注意

  • • Codes differ by country; confirm with local rules.
  • • Does not size the timber.

ブラウザ内ローカル処理とプライバシー保護

一般的なWebツールは文書やメディアを外部サーバーへ送信します。階段設計・ささら桁(Stringer)計算機 (蹴上・踏面) はお使いのブラウザタブ内のみで完結します:

このタブ内で処理完結

入力テキストやファイルは端末内で処理され、外部の処理サーバーへアップロードされません。

入力データのログ保存なし

作業内容や貼り付けたデータを保存・記録しません(通常の静的配信CDNリクエストのみ発生します)。

タブ単位の一時メモリ管理

作業データはタブ内のメモリ上のみに保持され、リセットまたはタブを閉じると破棄されます。

よくある質問 (FAQ)

Why one fewer tread than risers?

The top floor acts as the last tread.

What is the 2R + T rule?

Twice the riser plus the tread should be about 600–650 mm.

Is data uploaded?

No.

関連するマイクロツール

Microdeckを応援する

完全任意 · $3から · アカウント登録不要

金額を選択 (USD):選択中:$5

最小金額は $3 USD です。

完全任意 · $3から · Gumroadの安全な決済ページが開きます。