Microdeck.tools 100 % en el navegador

Calculadora de Escaleras y Limones (Peldaños y Huella)

New

Calcula el número de peldaños, altura exacta de contrahuella, profundidad de huella, longitud de zanca y ángulo de inclinación según la ley de Blondel.

100 % en tu navegador Sin subir archivos Resultados al instante

¿Te ahorró tiempo esta herramienta? Ayuda a mantener Microdeck gratis y al día. Opcional · Desde $3.

Cómo funciona por dentro

The total rise is divided into equal risers close to your target height. The number of treads is one less, so the run is treads times tread depth. The stringer length comes from the right triangle, and the tool checks the common comfort rule 2 × riser + tread against 600–650 mm.

Instrucciones paso a paso

1

Choose mm or inches.

2

Enter the total rise and your target riser and tread.

3

Optionally enter the tread thickness.

4

Read the steps, run, stringer length and warnings.

Funciones principales y ventajas

  • Millimetres or inches
  • Comfort and code guidance
  • First riser correction

Metodología, fórmulas y estándares técnicos

Risers = round(rise ÷ target riser); run = (risers − 1) × tread; stringer = √(rise² + run²).

Ejemplos prácticos y casos límite

2700 mm rise

Entrada
180 mm riser, 260 mm tread
Salida
15 risers, 3640 mm run

Límites y notas de precisión

  • • Codes differ by country; confirm with local rules.
  • • Does not size the timber.

Procesamiento local en tu navegador y privacidad

Los conversores tradicionales suben tus documentos, textos o archivos multimedia a servidores remotos. Calculadora de Escaleras y Limones (Peldaños y Huella) se ejecuta dentro de tu pestaña:

Procesado en esta pestaña

Tus textos y archivos se procesan localmente sin enviarse a ningún servidor externo.

Sin registro de tus archivos

Microdeck no guarda ni registra el contenido que introduces en las herramientas.

Memoria temporal de la pestaña

Los resultados permanecen en la memoria de tu navegador y se liberan al cerrar o reiniciar.

Preguntas frecuentes (FAQ)

Why one fewer tread than risers?

The top floor acts as the last tread.

What is the 2R + T rule?

Twice the riser plus the tread should be about 600–650 mm.

Is data uploaded?

No.

Explora herramientas relacionadas

Apoyar a Microdeck

Totalmente opcional · Desde $3 · Sin cuenta

Elige un importe (USD):Seleccionado:$5

El aporte mínimo es de $3 USD.

Totalmente opcional · Desde $3 · Pago seguro en Gumroad.