Microdeck.tools 100% 瀏覽器本地執行

公車客運路線迴轉工時與配置車輛數計算機 (Route Turnaround)

New

大眾運輸規劃必備工具:依據去程與回程里程、市區平均營運車速、站牌停靠上下客時間與調度站端點休息緩衝工時(Layover),精算單趟全循環時間,並依目標發車班距(Headway),精準推算路線所需配置之最低公車台數。

100% 瀏覽器本地執行 不上傳至伺服器 即時顯示結果

這個工具替您省下寶貴時間了嗎? 歡迎自願贊助,協助 Microdeck 維持免費與穩定運作 · 最低 $3 起。

底層運作原理

Enter the route length, the average speed, the number of stops and time at each, the layover at each end and your target interval. The tool gives the round-trip time, the buses you need, the trips each bus can make in a day and the departures in each direction.

詳細操作步驟

1

Enter length, speed and stops.

2

Enter the layover and service hours.

3

Enter the target interval.

4

Read the cycle time and buses needed.

核心功能與效能優勢

  • Cycle time
  • Buses for an interval
  • Trips per day
  • Layover check

運算方法、公式與技術標準

Cycle = 2 × (driving + stop time + layover).

實作範例與邊界案例

18 km route at 22 km/h

輸入
8 minute layover
輸出
130 minutes, 9 buses for 15 minutes

使用限制與精準度說明

  • • Use observed running times where you can.
  • • Peak traffic changes speed.

瀏覽器本地運算與隱私保障

傳統線上轉換網站會將您的文件、文字片段或影音檔案上傳至遠端伺服器。公車客運路線迴轉工時與配置車輛數計算機 (Route Turnaround) 完全在您的瀏覽器分頁內運行:

於此分頁本地處理

您的檔案與文字都在裝置本機計算,不會傳送內容至任何後端伺服器。

絕不記錄操作內容

Microdeck 不會記錄或儲存您在工具內貼上的任何檔案或程式碼。

分頁記憶體即時釋放

所有暫存結果僅存在目前分頁記憶體中,重設或關閉分頁後即刻清除。

常見問題 (FAQ)

What layover is right?

About 10–15% of the one-way time is common.

Is data uploaded?

No.

探索相關微型工具

支持 Microdeck

完全自願 · $3 起 · 免註冊帳號

選擇金額 (USD):已選金額:$5

單次最低贊助金額為 $3 USD。

完全自願 · $3 起 · 將透過 Gumroad 安全結帳頁面完成。