작동 원리 및 구조
Enter the route length, the average speed, the number of stops and time at each, the layover at each end and your target interval. The tool gives the round-trip time, the buses you need, the trips each bus can make in a day and the departures in each direction.
단계별 사용 방법
Enter length, speed and stops.
Enter the layover and service hours.
Enter the target interval.
Read the cycle time and buses needed.
주요 기능 및 장점
- Cycle time
- Buses for an interval
- Trips per day
- Layover check
계산 방식, 공식 및 기술 표준
Cycle = 2 × (driving + stop time + layover).
입출력 예시 및 엣지 케이스
18 km route at 22 km/h
8 minute layover
130 minutes, 9 buses for 15 minutes
제한 사항 및 정확도 안내
- • Use observed running times where you can.
- • Peak traffic changes speed.
브라우저 로컬 처리 및 개인정보 보호
일반 웹 변환기는 문서나 미디어 파일을 원격 서버에 업로드합니다. 버스 노선 왕복 회차 시간(순환주기) 및 소요 대수 계산기 도구는 현재 브라우저 탭 내부에서만 실행됩니다:
입력 텍스트와 파일은 외부 서버로 전송되지 않고 기기 내에서 로컬로 계산됩니다.
도구에 붙여넣은 파일이나 데이터를 서버에 기록하거나 저장하지 않습니다.
작업 결과는 브라우저 탭 메모리에만 유지되며 탭을 닫거나 초기화하면 즉시 해제됩니다.
자주 묻는 질문 (FAQ)
What layover is right?
About 10–15% of the one-way time is common.
Is data uploaded?
No.