仕組みと内部処理
Enter the route length, the average speed, the number of stops and time at each, the layover at each end and your target interval. The tool gives the round-trip time, the buses you need, the trips each bus can make in a day and the departures in each direction.
使い方ステップ
Enter length, speed and stops.
Enter the layover and service hours.
Enter the target interval.
Read the cycle time and buses needed.
主な機能と特長
- Cycle time
- Buses for an interval
- Trips per day
- Layover check
計算ロジック・仕様・技術基準
Cycle = 2 × (driving + stop time + layover).
入出力の例・エッジケース
18 km route at 22 km/h
8 minute layover
130 minutes, 9 buses for 15 minutes
仕様上の制限・精度に関するご注意
- • Use observed running times where you can.
- • Peak traffic changes speed.
ブラウザ内ローカル処理とプライバシー保護
一般的なWebツールは文書やメディアを外部サーバーへ送信します。バス路線1運行所要時間・必要車両台数計算機 (Route Turnaround) はお使いのブラウザタブ内のみで完結します:
入力テキストやファイルは端末内で処理され、外部の処理サーバーへアップロードされません。
作業内容や貼り付けたデータを保存・記録しません(通常の静的配信CDNリクエストのみ発生します)。
作業データはタブ内のメモリ上のみに保持され、リセットまたはタブを閉じると破棄されます。
よくある質問 (FAQ)
What layover is right?
About 10–15% of the one-way time is common.
Is data uploaded?
No.