底層運作原理
TDS (ppm) = EC (mS/cm) × 1000 × scale factor. The scale is 0.5 (NaCl, 500 scale), 0.64 (442 or 640 scale) or 0.7 (KCl, 700 scale). If the reading was taken away from 25 °C, EC is corrected with about 2% per °C: EC25 = EC ÷ (1 + 0.02 × (T − 25)).
詳細操作步驟
Choose the direction: ppm to EC or EC to ppm.
Select the scale your meter uses.
Enter the value and, optionally, the solution temperature.
Read EC in mS/cm and µS/cm, or ppm.
核心功能與效能優勢
- Three common scales
- Temperature compensation
- mS/cm, µS/cm and dS/m shown
- Local calculation
實作範例與邊界案例
700 ppm on the 0.5 scale
700 ppm
1.4 mS/cm
使用限制與精準度說明
- • The meter's scale is set by its manufacturer; check the manual. A wrong scale gives a wrong answer.
- • The 2%/°C coefficient is an approximation.
瀏覽器本地運算與隱私保障
傳統線上轉換網站會將您的文件、文字片段或影音檔案上傳至遠端伺服器。PPM 轉 EC 換算器(TDS) 完全在您的瀏覽器分頁內運行:
您的檔案與文字都在裝置本機計算,不會傳送內容至任何後端伺服器。
Microdeck 不會記錄或儲存您在工具內貼上的任何檔案或程式碼。
所有暫存結果僅存在目前分頁記憶體中,重設或關閉分頁後即刻清除。
常見問題 (FAQ)
Which scale should I choose?
Use the one printed in your meter manual. Many hydroponic meters use 0.5, and many Hanna meters offer 0.5 and 0.7.
Is ppm the same as mg/L?
For TDS they are treated as equivalent in dilute solutions.
Is data stored?
No.