仕組みと内部処理
TDS (ppm) = EC (mS/cm) × 1000 × scale factor. The scale is 0.5 (NaCl, 500 scale), 0.64 (442 or 640 scale) or 0.7 (KCl, 700 scale). If the reading was taken away from 25 °C, EC is corrected with about 2% per °C: EC25 = EC ÷ (1 + 0.02 × (T − 25)).
使い方ステップ
Choose the direction: ppm to EC or EC to ppm.
Select the scale your meter uses.
Enter the value and, optionally, the solution temperature.
Read EC in mS/cm and µS/cm, or ppm.
主な機能と特長
- Three common scales
- Temperature compensation
- mS/cm, µS/cm and dS/m shown
- Local calculation
入出力の例・エッジケース
700 ppm on the 0.5 scale
700 ppm
1.4 mS/cm
仕様上の制限・精度に関するご注意
- • The meter's scale is set by its manufacturer; check the manual. A wrong scale gives a wrong answer.
- • The 2%/°C coefficient is an approximation.
ブラウザ内ローカル処理とプライバシー保護
一般的なWebツールは文書やメディアを外部サーバーへ送信します。PPM→EC変換(TDS) はお使いのブラウザタブ内のみで完結します:
入力テキストやファイルは端末内で処理され、外部の処理サーバーへアップロードされません。
作業内容や貼り付けたデータを保存・記録しません(通常の静的配信CDNリクエストのみ発生します)。
作業データはタブ内のメモリ上のみに保持され、リセットまたはタブを閉じると破棄されます。
よくある質問 (FAQ)
Which scale should I choose?
Use the one printed in your meter manual. Many hydroponic meters use 0.5, and many Hanna meters offer 0.5 and 0.7.
Is ppm the same as mg/L?
For TDS they are treated as equivalent in dilute solutions.
Is data stored?
No.