작동 원리 및 구조
TDS (ppm) = EC (mS/cm) × 1000 × scale factor. The scale is 0.5 (NaCl, 500 scale), 0.64 (442 or 640 scale) or 0.7 (KCl, 700 scale). If the reading was taken away from 25 °C, EC is corrected with about 2% per °C: EC25 = EC ÷ (1 + 0.02 × (T − 25)).
단계별 사용 방법
Choose the direction: ppm to EC or EC to ppm.
Select the scale your meter uses.
Enter the value and, optionally, the solution temperature.
Read EC in mS/cm and µS/cm, or ppm.
주요 기능 및 장점
- Three common scales
- Temperature compensation
- mS/cm, µS/cm and dS/m shown
- Local calculation
입출력 예시 및 엣지 케이스
700 ppm on the 0.5 scale
700 ppm
1.4 mS/cm
제한 사항 및 정확도 안내
- • The meter's scale is set by its manufacturer; check the manual. A wrong scale gives a wrong answer.
- • The 2%/°C coefficient is an approximation.
브라우저 로컬 처리 및 개인정보 보호
일반 웹 변환기는 문서나 미디어 파일을 원격 서버에 업로드합니다. PPM → EC 변환기 (TDS) 도구는 현재 브라우저 탭 내부에서만 실행됩니다:
입력 텍스트와 파일은 외부 서버로 전송되지 않고 기기 내에서 로컬로 계산됩니다.
도구에 붙여넣은 파일이나 데이터를 서버에 기록하거나 저장하지 않습니다.
작업 결과는 브라우저 탭 메모리에만 유지되며 탭을 닫거나 초기화하면 즉시 해제됩니다.
자주 묻는 질문 (FAQ)
Which scale should I choose?
Use the one printed in your meter manual. Many hydroponic meters use 0.5, and many Hanna meters offer 0.5 and 0.7.
Is ppm the same as mg/L?
For TDS they are treated as equivalent in dilute solutions.
Is data stored?
No.