Microdeck.tools 100% 瀏覽器本地執行

散熱片熱阻計算器

New

依據功耗瓦數、最高結溫 (Tj)、環境溫度與導熱矽膠熱阻,計算確保元件安全工作的最大散熱熱阻。

100% 瀏覽器本地執行 不上傳至伺服器 即時顯示結果

這個工具替您省下寶貴時間了嗎? 歡迎自願贊助,協助 Microdeck 維持免費與穩定運作 · 最低 $3 起。

底層運作原理

The temperature rise is power times the total thermal resistance from junction to air: Rθjc (junction to case), Rθcs (case to sink) and Rθsa (sink to air). Subtract the first two from the available budget (Tj max − ambient) ÷ power and you have the largest heat sink resistance that still works.

詳細操作步驟

1

Enter the power the part dissipates and the ambient temperature.

2

Enter the maximum junction temperature, Rθjc and Rθcs from the datasheet.

3

Read the heat sink °C/W you need, or switch to check mode and enter your sink.

核心功能與效能優勢

  • Required Rθsa
  • Junction temperature check with margin
  • Warnings for impossible budgets
  • Heat sink temperature estimate

運算方法、公式與技術標準

Rθsa(max) = (Tj − Ta) ÷ P − Rθjc − Rθcs. Tj = Ta + P × (Rθjc + Rθcs + Rθsa).

實作範例與邊界案例

10 W, 40 °C air, Tj 125 °C

輸入
Rθjc 1.5, Rθcs 0.5
輸出
Rθsa ≤ 6.5 °C/W

使用限制與精準度說明

  • • Heat sink ratings assume specific airflow; enclosures raise the local ambient.
  • • Pulsed loads need transient thermal data.

瀏覽器本地運算與隱私保障

傳統線上轉換網站會將您的文件、文字片段或影音檔案上傳至遠端伺服器。散熱片熱阻計算器 完全在您的瀏覽器分頁內運行:

於此分頁本地處理

您的檔案與文字都在裝置本機計算,不會傳送內容至任何後端伺服器。

絕不記錄操作內容

Microdeck 不會記錄或儲存您在工具內貼上的任何檔案或程式碼。

分頁記憶體即時釋放

所有暫存結果僅存在目前分頁記憶體中,重設或關閉分頁後即刻清除。

常見問題 (FAQ)

Which power do I enter?

The power turned into heat, for example (Vin − Vout) × I for a linear regulator.

Is a lower °C/W better?

Yes, a lower number means a better heat sink.

Is anything uploaded?

No.

探索相關微型工具

支持 Microdeck

完全自願 · $3 起 · 免註冊帳號

選擇金額 (USD):已選金額:$5

單次最低贊助金額為 $3 USD。

完全自願 · $3 起 · 將透過 Gumroad 安全結帳頁面完成。