작동 원리 및 구조
The temperature rise is power times the total thermal resistance from junction to air: Rθjc (junction to case), Rθcs (case to sink) and Rθsa (sink to air). Subtract the first two from the available budget (Tj max − ambient) ÷ power and you have the largest heat sink resistance that still works.
단계별 사용 방법
Enter the power the part dissipates and the ambient temperature.
Enter the maximum junction temperature, Rθjc and Rθcs from the datasheet.
Read the heat sink °C/W you need, or switch to check mode and enter your sink.
주요 기능 및 장점
- Required Rθsa
- Junction temperature check with margin
- Warnings for impossible budgets
- Heat sink temperature estimate
계산 방식, 공식 및 기술 표준
Rθsa(max) = (Tj − Ta) ÷ P − Rθjc − Rθcs. Tj = Ta + P × (Rθjc + Rθcs + Rθsa).
입출력 예시 및 엣지 케이스
10 W, 40 °C air, Tj 125 °C
Rθjc 1.5, Rθcs 0.5
Rθsa ≤ 6.5 °C/W
제한 사항 및 정확도 안내
- • Heat sink ratings assume specific airflow; enclosures raise the local ambient.
- • Pulsed loads need transient thermal data.
브라우저 로컬 처리 및 개인정보 보호
일반 웹 변환기는 문서나 미디어 파일을 원격 서버에 업로드합니다. 방열판 열저항 계산기 도구는 현재 브라우저 탭 내부에서만 실행됩니다:
입력 텍스트와 파일은 외부 서버로 전송되지 않고 기기 내에서 로컬로 계산됩니다.
도구에 붙여넣은 파일이나 데이터를 서버에 기록하거나 저장하지 않습니다.
작업 결과는 브라우저 탭 메모리에만 유지되며 탭을 닫거나 초기화하면 즉시 해제됩니다.
자주 묻는 질문 (FAQ)
Which power do I enter?
The power turned into heat, for example (Vin − Vout) × I for a linear regulator.
Is a lower °C/W better?
Yes, a lower number means a better heat sink.
Is anything uploaded?
No.