仕組みと内部処理
The temperature rise is power times the total thermal resistance from junction to air: Rθjc (junction to case), Rθcs (case to sink) and Rθsa (sink to air). Subtract the first two from the available budget (Tj max − ambient) ÷ power and you have the largest heat sink resistance that still works.
使い方ステップ
Enter the power the part dissipates and the ambient temperature.
Enter the maximum junction temperature, Rθjc and Rθcs from the datasheet.
Read the heat sink °C/W you need, or switch to check mode and enter your sink.
主な機能と特長
- Required Rθsa
- Junction temperature check with margin
- Warnings for impossible budgets
- Heat sink temperature estimate
計算ロジック・仕様・技術基準
Rθsa(max) = (Tj − Ta) ÷ P − Rθjc − Rθcs. Tj = Ta + P × (Rθjc + Rθcs + Rθsa).
入出力の例・エッジケース
10 W, 40 °C air, Tj 125 °C
Rθjc 1.5, Rθcs 0.5
Rθsa ≤ 6.5 °C/W
仕様上の制限・精度に関するご注意
- • Heat sink ratings assume specific airflow; enclosures raise the local ambient.
- • Pulsed loads need transient thermal data.
ブラウザ内ローカル処理とプライバシー保護
一般的なWebツールは文書やメディアを外部サーバーへ送信します。ヒートシンク熱抵抗計算機 はお使いのブラウザタブ内のみで完結します:
入力テキストやファイルは端末内で処理され、外部の処理サーバーへアップロードされません。
作業内容や貼り付けたデータを保存・記録しません(通常の静的配信CDNリクエストのみ発生します)。
作業データはタブ内のメモリ上のみに保持され、リセットまたはタブを閉じると破棄されます。
よくある質問 (FAQ)
Which power do I enter?
The power turned into heat, for example (Vin − Vout) × I for a linear regulator.
Is a lower °C/W better?
Yes, a lower number means a better heat sink.
Is anything uploaded?
No.