底層運作原理
DLI is the total light a plant receives in a day: PPFD in µmol/m²/s times the seconds of light, divided by a million. Switch modes to find the PPFD needed for a target DLI. Enter the area and the efficacy of the lights to see the electrical power and daily energy.
詳細操作步驟
Choose DLI or PPFD mode.
Enter PPFD or target DLI and the hours of light.
Enter the area and light efficacy.
Read the DLI, class and power.
核心功能與效能優勢
- Both directions
- Light class
- LED power and kWh per day
- Typical crop ranges
運算方法、公式與技術標準
DLI = PPFD × hours × 3600 ÷ 1,000,000.
實作範例與邊界案例
400 PPFD for 16 h
1 m², 2.5 µmol/J
23 mol/m²/day, 160 W
使用限制與精準度說明
- • Measure PPFD at plant height; real fixtures are uneven.
- • High light needs matching water, nutrients and heat removal.
瀏覽器本地運算與隱私保障
傳統線上轉換網站會將您的文件、文字片段或影音檔案上傳至遠端伺服器。植物生長燈 DLI 日照累積光量與 PPFD 光量子計算器 完全在您的瀏覽器分頁內運行:
您的檔案與文字都在裝置本機計算,不會傳送內容至任何後端伺服器。
Microdeck 不會記錄或儲存您在工具內貼上的任何檔案或程式碼。
所有暫存結果僅存在目前分頁記憶體中,重設或關閉分頁後即刻清除。
常見問題 (FAQ)
What DLI do lettuce plants need?
Roughly 12–17 mol/m²/day.
Is higher always better?
No; too much light without CO₂, water and nutrients can harm plants.
Is data uploaded?
No.