仕組みと内部処理
DLI is the total light a plant receives in a day: PPFD in µmol/m²/s times the seconds of light, divided by a million. Switch modes to find the PPFD needed for a target DLI. Enter the area and the efficacy of the lights to see the electrical power and daily energy.
使い方ステップ
Choose DLI or PPFD mode.
Enter PPFD or target DLI and the hours of light.
Enter the area and light efficacy.
Read the DLI, class and power.
主な機能と特長
- Both directions
- Light class
- LED power and kWh per day
- Typical crop ranges
計算ロジック・仕様・技術基準
DLI = PPFD × hours × 3600 ÷ 1,000,000.
入出力の例・エッジケース
400 PPFD for 16 h
1 m², 2.5 µmol/J
23 mol/m²/day, 160 W
仕様上の制限・精度に関するご注意
- • Measure PPFD at plant height; real fixtures are uneven.
- • High light needs matching water, nutrients and heat removal.
ブラウザ内ローカル処理とプライバシー保護
一般的なWebツールは文書やメディアを外部サーバーへ送信します。植物育成LED光量・DLI&PPFD相互計算機 (日射積算光量) はお使いのブラウザタブ内のみで完結します:
入力テキストやファイルは端末内で処理され、外部の処理サーバーへアップロードされません。
作業内容や貼り付けたデータを保存・記録しません(通常の静的配信CDNリクエストのみ発生します)。
作業データはタブ内のメモリ上のみに保持され、リセットまたはタブを閉じると破棄されます。
よくある質問 (FAQ)
What DLI do lettuce plants need?
Roughly 12–17 mol/m²/day.
Is higher always better?
No; too much light without CO₂, water and nutrients can harm plants.
Is data uploaded?
No.