작동 원리 및 구조
DLI is the total light a plant receives in a day: PPFD in µmol/m²/s times the seconds of light, divided by a million. Switch modes to find the PPFD needed for a target DLI. Enter the area and the efficacy of the lights to see the electrical power and daily energy.
단계별 사용 방법
Choose DLI or PPFD mode.
Enter PPFD or target DLI and the hours of light.
Enter the area and light efficacy.
Read the DLI, class and power.
주요 기능 및 장점
- Both directions
- Light class
- LED power and kWh per day
- Typical crop ranges
계산 방식, 공식 및 기술 표준
DLI = PPFD × hours × 3600 ÷ 1,000,000.
입출력 예시 및 엣지 케이스
400 PPFD for 16 h
1 m², 2.5 µmol/J
23 mol/m²/day, 160 W
제한 사항 및 정확도 안내
- • Measure PPFD at plant height; real fixtures are uneven.
- • High light needs matching water, nutrients and heat removal.
브라우저 로컬 처리 및 개인정보 보호
일반 웹 변환기는 문서나 미디어 파일을 원격 서버에 업로드합니다. 식물생장 LED 조명 DLI 및 PPFD 광량 계산기 도구는 현재 브라우저 탭 내부에서만 실행됩니다:
입력 텍스트와 파일은 외부 서버로 전송되지 않고 기기 내에서 로컬로 계산됩니다.
도구에 붙여넣은 파일이나 데이터를 서버에 기록하거나 저장하지 않습니다.
작업 결과는 브라우저 탭 메모리에만 유지되며 탭을 닫거나 초기화하면 즉시 해제됩니다.
자주 묻는 질문 (FAQ)
What DLI do lettuce plants need?
Roughly 12–17 mol/m²/day.
Is higher always better?
No; too much light without CO₂, water and nutrients can harm plants.
Is data uploaded?
No.