底層運作原理
Enter the water to apply, either as a depth over an area (1 mm over 1 m² is 1 litre) or as litres per plant. The tool divides by the irrigation efficiency, then by the total flow of all emitters to give the run time. It also checks whether your water supply can feed that many emitters at once.
詳細操作步驟
Choose depth or litres per plant.
Enter the number of emitters and their flow.
Enter the supply flow and efficiency.
Read the run time and zone advice.
核心功能與效能優勢
- Depth or per-plant input
- Hours and minutes
- Supply flow check
- Zone suggestion
運算方法、公式與技術標準
Litres = area (m²) × depth (mm) ÷ efficiency. Run time = litres ÷ (emitters × emitter flow).
實作範例與邊界案例
50 m² at 5 mm, 100 emitters of 2 L/h
90% efficiency
1 h 23 min
使用限制與精準度說明
- • Soil type and rainfall change the real need; check the wet zone by digging.
瀏覽器本地運算與隱私保障
傳統線上轉換網站會將您的文件、文字片段或影音檔案上傳至遠端伺服器。滴灌系統運轉時間與灌溉時長計算器 (Drip Irrigation Runtime) 完全在您的瀏覽器分頁內運行:
您的檔案與文字都在裝置本機計算,不會傳送內容至任何後端伺服器。
Microdeck 不會記錄或儲存您在工具內貼上的任何檔案或程式碼。
所有暫存結果僅存在目前分頁記憶體中,重設或關閉分頁後即刻清除。
常見問題 (FAQ)
How efficient is drip?
Usually 85–95%.
What if the supply is too small?
Split the system into zones that run in turn.
Is data uploaded?
No.