Cara Kerja di Balik Layar
Enter the water to apply, either as a depth over an area (1 mm over 1 m² is 1 litre) or as litres per plant. The tool divides by the irrigation efficiency, then by the total flow of all emitters to give the run time. It also checks whether your water supply can feed that many emitters at once.
Panduan Langkah demi Langkah
Choose depth or litres per plant.
Enter the number of emitters and their flow.
Enter the supply flow and efficiency.
Read the run time and zone advice.
Fitur Utama & Performa
- Depth or per-plant input
- Hours and minutes
- Supply flow check
- Zone suggestion
Metodologi, Rumus & Standar Teknis
Litres = area (m²) × depth (mm) ÷ efficiency. Run time = litres ÷ (emitters × emitter flow).
Contoh Kasus & Uji Coba
50 m² at 5 mm, 100 emitters of 2 L/h
90% efficiency
1 h 23 min
Catatan Batasan & Akurasi
- • Soil type and rainfall change the real need; check the wet zone by digging.
Pemrosesan Lokal di Browser & Privasi
Konverter web konvensional mengunggah dokumen, teks, atau media ke server jarak jauh. Kalkulator Durasi Siram Irigasi Tetes (Drip Irrigation Runtime) berjalan langsung di tab browser Anda:
Teks dan file Anda diproses secara lokal tanpa mengirim muatan apa pun ke server.
Microdeck tidak mencatat atau menyimpan file dan teks yang Anda masukkan ke ruang kerja alat.
Hasil kerja hanya tersimpan di memori tab dan langsung terhapus saat Anda me-reset atau menutup tab.
Pertanyaan yang Sering Diajukan (FAQ)
How efficient is drip?
Usually 85–95%.
What if the supply is too small?
Split the system into zones that run in turn.
Is data uploaded?
No.
Jelajahi Alat Mikro Terkait
Kalkulator Total Head & Daya Pompa Air (HP / kW)
Hitung total dynamic head (TDH), daya hidrolik, dan daya motor pompa
Kalkulator Kebutuhan Mulsa Organik (Serpihan Kayu / Jerami)
Hitung meter kubik, liter, dan karung mulsa organik dari luas area dan ketebalan hamparan
Kalkulator Volume Tanah untuk Bedengan Kayu / Raised Bed
Hitung liter, meter kubik, dan karung tanah media tanam untuk bedengan kebun