How It Works Under the Hood
Enter the water to apply, either as a depth over an area (1 mm over 1 m² is 1 litre) or as litres per plant. The tool divides by the irrigation efficiency, then by the total flow of all emitters to give the run time. It also checks whether your water supply can feed that many emitters at once.
Step-by-Step Instructions
Choose depth or litres per plant.
Enter the number of emitters and their flow.
Enter the supply flow and efficiency.
Read the run time and zone advice.
Key Features & Performance
- Depth or per-plant input
- Hours and minutes
- Supply flow check
- Zone suggestion
Methodology, Formulas & Technical Standards
Litres = area (m²) × depth (mm) ÷ efficiency. Run time = litres ÷ (emitters × emitter flow).
Worked Examples & Edge Cases
50 m² at 5 mm, 100 emitters of 2 L/h
90% efficiency
1 h 23 min
Limitations, Scope & Accuracy Notes
- • Soil type and rainfall change the real need; check the wet zone by digging.
Local Browser Processing & Privacy
Traditional web converters upload your documents, snippets, or media files to remote servers. Drip Irrigation Runtime Calculator runs inside your browser tab:
Your input text and files are processed locally without uploading payloads to a processing server.
Microdeck does not log or store the files or inputs you paste into tool workspaces (normal static hosting/CDN requests still load page assets).
Working outputs stay in your browser tab and are released when you reset the tool or close the tab.
Frequently Asked Questions
How efficient is drip?
Usually 85–95%.
What if the supply is too small?
Split the system into zones that run in turn.
Is data uploaded?
No.