底層運作原理
The short-form torque equation is T = K × F × d, where K is the nut factor that depends on lubrication. Choose the bolt size, property class and thread condition and either enter a torque to see the clamp force and percent of proof load, or enter a preload percentage to get the torque.
詳細操作步驟
Choose the bolt size and property class.
Choose the thread condition.
Pick the direction and enter torque or preload percent.
Read clamp force, proof load and torque.
核心功能與效能優勢
- M3–M30 coarse thread
- Classes 4.8 to 12.9 and A2-70
- Lubrication presets
- Warnings near proof load
運算方法、公式與技術標準
T = K·F·d; proof load = proof strength × tensile stress area.
實作範例與邊界案例
M10 8.8 at 40 N·m
Dry
About 20 kN, 57% of proof
使用限制與精準度說明
- • Torque-based preload scatters by ±25–35%; critical joints need specified methods.
瀏覽器本地運算與隱私保障
傳統線上轉換網站會將您的文件、文字片段或影音檔案上傳至遠端伺服器。螺栓鎖緊扭矩與預緊夾緊力計算器 (M3至M30) 完全在您的瀏覽器分頁內運行:
您的檔案與文字都在裝置本機計算,不會傳送內容至任何後端伺服器。
Microdeck 不會記錄或儲存您在工具內貼上的任何檔案或程式碼。
所有暫存結果僅存在目前分頁記憶體中,重設或關閉分頁後即刻清除。
常見問題 (FAQ)
What is K?
About 0.2 for dry steel and lower when oiled.
Should I lubricate?
Only if the torque value you follow assumes it.
Is data uploaded?
No.