작동 원리 및 구조
The short-form torque equation is T = K × F × d, where K is the nut factor that depends on lubrication. Choose the bolt size, property class and thread condition and either enter a torque to see the clamp force and percent of proof load, or enter a preload percentage to get the torque.
단계별 사용 방법
Choose the bolt size and property class.
Choose the thread condition.
Pick the direction and enter torque or preload percent.
Read clamp force, proof load and torque.
주요 기능 및 장점
- M3–M30 coarse thread
- Classes 4.8 to 12.9 and A2-70
- Lubrication presets
- Warnings near proof load
계산 방식, 공식 및 기술 표준
T = K·F·d; proof load = proof strength × tensile stress area.
입출력 예시 및 엣지 케이스
M10 8.8 at 40 N·m
Dry
About 20 kN, 57% of proof
제한 사항 및 정확도 안내
- • Torque-based preload scatters by ±25–35%; critical joints need specified methods.
브라우저 로컬 처리 및 개인정보 보호
일반 웹 변환기는 문서나 미디어 파일을 원격 서버에 업로드합니다. 볼트 조임 토크 및 축력(체결력) 계산기 (M3~M30) 도구는 현재 브라우저 탭 내부에서만 실행됩니다:
입력 텍스트와 파일은 외부 서버로 전송되지 않고 기기 내에서 로컬로 계산됩니다.
도구에 붙여넣은 파일이나 데이터를 서버에 기록하거나 저장하지 않습니다.
작업 결과는 브라우저 탭 메모리에만 유지되며 탭을 닫거나 초기화하면 즉시 해제됩니다.
자주 묻는 질문 (FAQ)
What is K?
About 0.2 for dry steel and lower when oiled.
Should I lubricate?
Only if the torque value you follow assumes it.
Is data uploaded?
No.