Microdeck.tools 100% 瀏覽器本地執行

3D列印成本與電費報價計算器

New

輸入線材克數、列印時長、機器功耗、失敗率與利潤率,自動試算3D列印代工成本與對外報價。

100% 瀏覽器本地執行 不上傳至伺服器 即時顯示結果

這個工具替您省下寶貴時間了嗎? 歡迎自願贊助,協助 Microdeck 維持免費與穩定運作 · 最低 $3 起。

底層運作原理

The cost has five parts: filament by weight, electricity from power and time, machine wear per hour, your own setup and finishing time, and an allowance for failed prints. The tool adds them and applies your margin to give a selling price.

詳細操作步驟

1

Enter the filament weight and spool price.

2

Enter print time, power and the electricity tariff.

3

Add wear, labour, failure allowance and margin.

4

Read the total cost and suggested price.

核心功能與效能優勢

  • Cost breakdown
  • Selling price with margin
  • Six currency symbols
  • Failure allowance

運算方法、公式與技術標準

Cost = (filament + power × hours × tariff + wear × hours + labour) × (1 + failure) , then × (1 + margin).

實作範例與邊界案例

85 g, 6.5 h

輸入
Defaults
輸出
Suggested price near 9.8

使用限制與精準度說明

  • • Average power depends on the printer and enclosure; measure with a plug meter if you can.

瀏覽器本地運算與隱私保障

傳統線上轉換網站會將您的文件、文字片段或影音檔案上傳至遠端伺服器。3D列印成本與電費報價計算器 完全在您的瀏覽器分頁內運行:

於此分頁本地處理

您的檔案與文字都在裝置本機計算,不會傳送內容至任何後端伺服器。

絕不記錄操作內容

Microdeck 不會記錄或儲存您在工具內貼上的任何檔案或程式碼。

分頁記憶體即時釋放

所有暫存結果僅存在目前分頁記憶體中,重設或關閉分頁後即刻清除。

常見問題 (FAQ)

What failure rate is realistic?

Between 5 and 15% for most hobby printers.

Does it include tax?

No.

Is data uploaded?

No.

探索相關微型工具

支持 Microdeck

完全自願 · $3 起 · 免註冊帳號

選擇金額 (USD):已選金額:$5

單次最低贊助金額為 $3 USD。

完全自願 · $3 起 · 將透過 Gumroad 安全結帳頁面完成。