仕組みと内部処理
The cost has five parts: filament by weight, electricity from power and time, machine wear per hour, your own setup and finishing time, and an allowance for failed prints. The tool adds them and applies your margin to give a selling price.
使い方ステップ
Enter the filament weight and spool price.
Enter print time, power and the electricity tariff.
Add wear, labour, failure allowance and margin.
Read the total cost and suggested price.
主な機能と特長
- Cost breakdown
- Selling price with margin
- Six currency symbols
- Failure allowance
計算ロジック・仕様・技術基準
Cost = (filament + power × hours × tariff + wear × hours + labour) × (1 + failure) , then × (1 + margin).
入出力の例・エッジケース
85 g, 6.5 h
Defaults
Suggested price near 9.8
仕様上の制限・精度に関するご注意
- • Average power depends on the printer and enclosure; measure with a plug meter if you can.
ブラウザ内ローカル処理とプライバシー保護
一般的なWebツールは文書やメディアを外部サーバーへ送信します。3Dプリント原価・電気代・販売価格計算機 はお使いのブラウザタブ内のみで完結します:
入力テキストやファイルは端末内で処理され、外部の処理サーバーへアップロードされません。
作業内容や貼り付けたデータを保存・記録しません(通常の静的配信CDNリクエストのみ発生します)。
作業データはタブ内のメモリ上のみに保持され、リセットまたはタブを閉じると破棄されます。
よくある質問 (FAQ)
What failure rate is realistic?
Between 5 and 15% for most hobby printers.
Does it include tax?
No.
Is data uploaded?
No.