작동 원리 및 구조
The cost has five parts: filament by weight, electricity from power and time, machine wear per hour, your own setup and finishing time, and an allowance for failed prints. The tool adds them and applies your margin to give a selling price.
단계별 사용 방법
Enter the filament weight and spool price.
Enter print time, power and the electricity tariff.
Add wear, labour, failure allowance and margin.
Read the total cost and suggested price.
주요 기능 및 장점
- Cost breakdown
- Selling price with margin
- Six currency symbols
- Failure allowance
계산 방식, 공식 및 기술 표준
Cost = (filament + power × hours × tariff + wear × hours + labour) × (1 + failure) , then × (1 + margin).
입출력 예시 및 엣지 케이스
85 g, 6.5 h
Defaults
Suggested price near 9.8
제한 사항 및 정확도 안내
- • Average power depends on the printer and enclosure; measure with a plug meter if you can.
브라우저 로컬 처리 및 개인정보 보호
일반 웹 변환기는 문서나 미디어 파일을 원격 서버에 업로드합니다. 3D 프린팅 출력 비용 및 전기 요금 계산기 도구는 현재 브라우저 탭 내부에서만 실행됩니다:
입력 텍스트와 파일은 외부 서버로 전송되지 않고 기기 내에서 로컬로 계산됩니다.
도구에 붙여넣은 파일이나 데이터를 서버에 기록하거나 저장하지 않습니다.
작업 결과는 브라우저 탭 메모리에만 유지되며 탭을 닫거나 초기화하면 즉시 해제됩니다.
자주 묻는 질문 (FAQ)
What failure rate is realistic?
Between 5 and 15% for most hobby printers.
Does it include tax?
No.
Is data uploaded?
No.