작동 원리 및 구조
The film must cover the curved or sloped roof, run down the side walls and be anchored at the base. The tool finds the roof arc from the span and rise (or the slope length of a gable), adds the walls and anchor allowance, and calculates the width, length and end-wall film.
단계별 사용 방법
Choose a hoop or gable house.
Enter the length, width, wall height and rise.
Choose the layers and allowances.
Read the film size and area.
주요 기능 및 장점
- Hoop arc and gable slope
- End-wall film
- Double layer
- Roll width check
계산 방식, 공식 및 기술 표준
Hoop radius = (w²/4 + h²) ÷ 2h; roof = radius × angle. Gable roof = 2 × √((w/2)² + rise²).
입출력 예시 및 엣지 케이스
30 × 8 m hoop house, 2.5 m rise
1.5 m walls
About 14.4 m wide film and 55 m² for the ends
제한 사항 및 정확도 안내
- • Allow for doors and vents.
- • Film widths come in standard sizes.
브라우저 로컬 처리 및 개인정보 보호
일반 웹 변환기는 문서나 미디어 파일을 원격 서버에 업로드합니다. 비닐하우스 피복 비닐(농PO/농비) 규격 및 소요 길이 계산기 도구는 현재 브라우저 탭 내부에서만 실행됩니다:
입력 텍스트와 파일은 외부 서버로 전송되지 않고 기기 내에서 로컬로 계산됩니다.
도구에 붙여넣은 파일이나 데이터를 서버에 기록하거나 저장하지 않습니다.
작업 결과는 브라우저 탭 메모리에만 유지되며 탭을 닫거나 초기화하면 즉시 해제됩니다.
자주 묻는 질문 (FAQ)
Why a double layer?
An inflated double layer saves heating energy.
Is data uploaded?
No.