仕組みと内部処理
The film must cover the curved or sloped roof, run down the side walls and be anchored at the base. The tool finds the roof arc from the span and rise (or the slope length of a gable), adds the walls and anchor allowance, and calculates the width, length and end-wall film.
使い方ステップ
Choose a hoop or gable house.
Enter the length, width, wall height and rise.
Choose the layers and allowances.
Read the film size and area.
主な機能と特長
- Hoop arc and gable slope
- End-wall film
- Double layer
- Roll width check
計算ロジック・仕様・技術基準
Hoop radius = (w²/4 + h²) ÷ 2h; roof = radius × angle. Gable roof = 2 × √((w/2)² + rise²).
入出力の例・エッジケース
30 × 8 m hoop house, 2.5 m rise
1.5 m walls
About 14.4 m wide film and 55 m² for the ends
仕様上の制限・精度に関するご注意
- • Allow for doors and vents.
- • Film widths come in standard sizes.
ブラウザ内ローカル処理とプライバシー保護
一般的なWebツールは文書やメディアを外部サーバーへ送信します。ビニールハウス農PO・農ビフィルム展張サイズ計算機 (被覆資材) はお使いのブラウザタブ内のみで完結します:
入力テキストやファイルは端末内で処理され、外部の処理サーバーへアップロードされません。
作業内容や貼り付けたデータを保存・記録しません(通常の静的配信CDNリクエストのみ発生します)。
作業データはタブ内のメモリ上のみに保持され、リセットまたはタブを閉じると破棄されます。
よくある質問 (FAQ)
Why a double layer?
An inflated double layer saves heating energy.
Is data uploaded?
No.