Cómo funciona por dentro
The film must cover the curved or sloped roof, run down the side walls and be anchored at the base. The tool finds the roof arc from the span and rise (or the slope length of a gable), adds the walls and anchor allowance, and calculates the width, length and end-wall film.
Instrucciones paso a paso
Choose a hoop or gable house.
Enter the length, width, wall height and rise.
Choose the layers and allowances.
Read the film size and area.
Funciones principales y ventajas
- Hoop arc and gable slope
- End-wall film
- Double layer
- Roll width check
Metodología, fórmulas y estándares técnicos
Hoop radius = (w²/4 + h²) ÷ 2h; roof = radius × angle. Gable roof = 2 × √((w/2)² + rise²).
Ejemplos prácticos y casos límite
30 × 8 m hoop house, 2.5 m rise
1.5 m walls
About 14.4 m wide film and 55 m² for the ends
Límites y notas de precisión
- • Allow for doors and vents.
- • Film widths come in standard sizes.
Procesamiento local en tu navegador y privacidad
Los conversores tradicionales suben tus documentos, textos o archivos multimedia a servidores remotos. Calculadora de Plástico para Invernaderos y Macrotúneles (Film PE) se ejecuta dentro de tu pestaña:
Tus textos y archivos se procesan localmente sin enviarse a ningún servidor externo.
Microdeck no guarda ni registra el contenido que introduces en las herramientas.
Los resultados permanecen en la memoria de tu navegador y se liberan al cerrar o reiniciar.
Preguntas frecuentes (FAQ)
Why a double layer?
An inflated double layer saves heating energy.
Is data uploaded?
No.
Explora herramientas relacionadas
Calculadora de Calefacción para Invernaderos (BTU y kW)
Potencia de calefactor para invernadero según cubierta, dimensiones y diferencia térmica
Calculadora de Malla de Sombreo y Reducción de Luz
Luz bajo la malla de sombra o porcentaje necesario para el nivel lumínico deseado
Calculadora de DLI y PPFD para Luces de Cultivo (LED Grow)
Integral de luz diaria (DLI) a partir de PPFD y horas de luz, o PPFD requerido