작동 원리 및 구조
Each stage multiplies the speed by the driver teeth over the driven teeth. Enter the teeth for every stage and the input speed; the tool gives the total ratio, the speed after each stage, the output speed and the torque using a per-stage efficiency.
단계별 사용 방법
Add a row for each gear stage.
Enter the driver and driven teeth.
Enter the input speed and optionally the torque.
Read the ratio, speed, torque and direction.
주요 기능 및 장점
- Any number of stages
- Per-stage efficiency
- Rotation direction
- Speed after every stage
계산 방식, 공식 및 기술 표준
Ratio = Π (driven ÷ driver). Output rpm = input ÷ ratio. Output torque = input × ratio × efficiency.
입출력 예시 및 엣지 케이스
12:36 then 10:30
Two stages
9:1, 333 rpm from 3000 rpm
제한 사항 및 정확도 안내
- • External spur gears assumed; idlers and planetary sets are not modelled.
브라우저 로컬 처리 및 개인정보 보호
일반 웹 변환기는 문서나 미디어 파일을 원격 서버에 업로드합니다. 기어비 및 출력 RPM 회전수 계산기 도구는 현재 브라우저 탭 내부에서만 실행됩니다:
입력 텍스트와 파일은 외부 서버로 전송되지 않고 기기 내에서 로컬로 계산됩니다.
도구에 붙여넣은 파일이나 데이터를 서버에 기록하거나 저장하지 않습니다.
작업 결과는 브라우저 탭 메모리에만 유지되며 탭을 닫거나 초기화하면 즉시 해제됩니다.
자주 묻는 질문 (FAQ)
Which gear is the driver?
The one connected to the motor.
Why does torque not rise by the full ratio?
Friction in each stage reduces it.
Is data uploaded?
No.