仕組みと内部処理
Each stage multiplies the speed by the driver teeth over the driven teeth. Enter the teeth for every stage and the input speed; the tool gives the total ratio, the speed after each stage, the output speed and the torque using a per-stage efficiency.
使い方ステップ
Add a row for each gear stage.
Enter the driver and driven teeth.
Enter the input speed and optionally the torque.
Read the ratio, speed, torque and direction.
主な機能と特長
- Any number of stages
- Per-stage efficiency
- Rotation direction
- Speed after every stage
計算ロジック・仕様・技術基準
Ratio = Π (driven ÷ driver). Output rpm = input ÷ ratio. Output torque = input × ratio × efficiency.
入出力の例・エッジケース
12:36 then 10:30
Two stages
9:1, 333 rpm from 3000 rpm
仕様上の制限・精度に関するご注意
- • External spur gears assumed; idlers and planetary sets are not modelled.
ブラウザ内ローカル処理とプライバシー保護
一般的なWebツールは文書やメディアを外部サーバーへ送信します。ギヤ比・回転数(RPM)・トルク計算機 はお使いのブラウザタブ内のみで完結します:
入力テキストやファイルは端末内で処理され、外部の処理サーバーへアップロードされません。
作業内容や貼り付けたデータを保存・記録しません(通常の静的配信CDNリクエストのみ発生します)。
作業データはタブ内のメモリ上のみに保持され、リセットまたはタブを閉じると破棄されます。
よくある質問 (FAQ)
Which gear is the driver?
The one connected to the motor.
Why does torque not rise by the full ratio?
Friction in each stage reduces it.
Is data uploaded?
No.