Cómo funciona por dentro
Each stage multiplies the speed by the driver teeth over the driven teeth. Enter the teeth for every stage and the input speed; the tool gives the total ratio, the speed after each stage, the output speed and the torque using a per-stage efficiency.
Instrucciones paso a paso
Add a row for each gear stage.
Enter the driver and driven teeth.
Enter the input speed and optionally the torque.
Read the ratio, speed, torque and direction.
Funciones principales y ventajas
- Any number of stages
- Per-stage efficiency
- Rotation direction
- Speed after every stage
Metodología, fórmulas y estándares técnicos
Ratio = Π (driven ÷ driver). Output rpm = input ÷ ratio. Output torque = input × ratio × efficiency.
Ejemplos prácticos y casos límite
12:36 then 10:30
Two stages
9:1, 333 rpm from 3000 rpm
Límites y notas de precisión
- • External spur gears assumed; idlers and planetary sets are not modelled.
Procesamiento local en tu navegador y privacidad
Los conversores tradicionales suben tus documentos, textos o archivos multimedia a servidores remotos. Calculadora de Relación de Engranajes y RPM se ejecuta dentro de tu pestaña:
Tus textos y archivos se procesan localmente sin enviarse a ningún servidor externo.
Microdeck no guarda ni registra el contenido que introduces en las herramientas.
Los resultados permanecen en la memoria de tu navegador y se liberan al cerrar o reiniciar.
Preguntas frecuentes (FAQ)
Which gear is the driver?
The one connected to the motor.
Why does torque not rise by the full ratio?
Friction in each stage reduces it.
Is data uploaded?
No.
Explora herramientas relacionadas
Calculadora de Distancia Entre Centros de Poleas y Correa
Longitud de correa o distancia entre centros, con relación de transmisión y ángulo de contacto
Calculadora de Velocidad y Fuerza de Actuador Lineal
Velocidad, tiempo de recorrido y empuje de actuadores por husillo
Calculadora de Pasos por mm (Steps/mm) para Motores Paso a Paso
Calcula pasos/mm para correas GT2 y husillos en impresoras 3D y CNC