底層運作原理
Drawbar power is the draft force times the speed. Tyres on soil lose power, so the PTO power needed equals the drawbar power divided by a surface ratio (0.86 on concrete down to 0.55 on soft soil). The tool adds a safety margin and converts to an engine size assuming about 88% of engine power reaches the PTO.
詳細操作步驟
Choose a pulled or PTO-driven implement.
Enter the draft and speed and the surface, or the PTO power.
Set the safety margin.
Read the PTO power and engine size.
核心功能與效能優勢
- kW and hp
- Four surface ratios
- Safety margin
- Engine size
運算方法、公式與技術標準
Drawbar kW = draft (kN) × speed (km/h) ÷ 3.6. PTO kW = drawbar ÷ surface ratio.
實作範例與邊界案例
18 kN draft at 7 km/h on firm soil
20% margin
About 56 kW PTO, 64 kW engine
使用限制與精準度說明
- • Rules of thumb only; check the implement maker’s tractor-size recommendation.
- • Slopes, wet soil and worn tools raise the load.
瀏覽器本地運算與隱私保障
傳統線上轉換網站會將您的文件、文字片段或影音檔案上傳至遠端伺服器。農業曳引機動力輸出軸 (PTO) 功率與牽引力計算器 完全在您的瀏覽器分頁內運行:
您的檔案與文字都在裝置本機計算,不會傳送內容至任何後端伺服器。
Microdeck 不會記錄或儲存您在工具內貼上的任何檔案或程式碼。
所有暫存結果僅存在目前分頁記憶體中,重設或關閉分頁後即刻清除。
常見問題 (FAQ)
What is drawbar power?
The power available at the hitch to pull a load.
Why is PTO power higher?
Tyre slip and rolling resistance lose power on the way to the ground.
Is data uploaded?
No.