Microdeck.tools 100% ブラウザ完結

トラクターPTO出力・牽引馬力(Drawbar)計算機 (作業機適正馬力)

New

土壌の種類、耕起深さ、作業速度から牽引抵抗(ドラフト力)を求め、牽引作業またはPTO軸駆動(540/1000rpm)に必要なトラクターエンジン出力馬力(PS/kW)を計算します。

100% ブラウザ完結 サーバー送信なし 即時処理

このツールは作業時間の短縮に役立ちましたか? Microdeckの無料運営と継続開発への応援(任意・$3〜)。

仕組みと内部処理

Drawbar power is the draft force times the speed. Tyres on soil lose power, so the PTO power needed equals the drawbar power divided by a surface ratio (0.86 on concrete down to 0.55 on soft soil). The tool adds a safety margin and converts to an engine size assuming about 88% of engine power reaches the PTO.

使い方ステップ

1

Choose a pulled or PTO-driven implement.

2

Enter the draft and speed and the surface, or the PTO power.

3

Set the safety margin.

4

Read the PTO power and engine size.

主な機能と特長

  • kW and hp
  • Four surface ratios
  • Safety margin
  • Engine size

計算ロジック・仕様・技術基準

Drawbar kW = draft (kN) × speed (km/h) ÷ 3.6. PTO kW = drawbar ÷ surface ratio.

入出力の例・エッジケース

18 kN draft at 7 km/h on firm soil

入力
20% margin
出力
About 56 kW PTO, 64 kW engine

仕様上の制限・精度に関するご注意

  • • Rules of thumb only; check the implement maker’s tractor-size recommendation.
  • • Slopes, wet soil and worn tools raise the load.

ブラウザ内ローカル処理とプライバシー保護

一般的なWebツールは文書やメディアを外部サーバーへ送信します。トラクターPTO出力・牽引馬力(Drawbar)計算機 (作業機適正馬力) はお使いのブラウザタブ内のみで完結します:

このタブ内で処理完結

入力テキストやファイルは端末内で処理され、外部の処理サーバーへアップロードされません。

入力データのログ保存なし

作業内容や貼り付けたデータを保存・記録しません(通常の静的配信CDNリクエストのみ発生します)。

タブ単位の一時メモリ管理

作業データはタブ内のメモリ上のみに保持され、リセットまたはタブを閉じると破棄されます。

よくある質問 (FAQ)

What is drawbar power?

The power available at the hitch to pull a load.

Why is PTO power higher?

Tyre slip and rolling resistance lose power on the way to the ground.

Is data uploaded?

No.

関連するマイクロツール

Microdeckを応援する

完全任意 · $3から · アカウント登録不要

金額を選択 (USD):選択中:$5

最小金額は $3 USD です。

完全任意 · $3から · Gumroadの安全な決済ページが開きます。