底層運作原理
When sheet metal bends, the neutral axis keeps its length. The arc of that axis is the bend allowance, BA = angle × (R + K × T). The bend deduction is twice the outside setback minus the allowance. Enter two outside leg lengths and the tool returns the flat blank length.
詳細操作步驟
Enter thickness, inside radius, angle and K-factor.
Optionally enter the two outside leg lengths.
Read BA, setback, BD and the flat length.
核心功能與效能優勢
- Bend allowance, setback and deduction
- K-factor guidance
- Flat pattern length
運算方法、公式與技術標準
BA = θ(R + K·T); OSSB = (R + T)·tan(θ/2); BD = 2·OSSB − BA.
實作範例與邊界案例
2 mm steel, R 2, 90°
K 0.4
BA ≈ 4.40 mm
使用限制與精準度說明
- • K-factor depends on material and tooling; verify with a test bend.
瀏覽器本地運算與隱私保障
傳統線上轉換網站會將您的文件、文字片段或影音檔案上傳至遠端伺服器。鈑金折彎展開與折彎補償計算器 (K-Factor) 完全在您的瀏覽器分頁內運行:
您的檔案與文字都在裝置本機計算,不會傳送內容至任何後端伺服器。
Microdeck 不會記錄或儲存您在工具內貼上的任何檔案或程式碼。
所有暫存結果僅存在目前分頁記憶體中,重設或關閉分頁後即刻清除。
常見問題 (FAQ)
What K-factor should I use?
About 0.4 for most air bends; adjust after a test.
What angle do I enter?
The angle the metal turns through, 90° for a square corner.
Is data uploaded?
No.