Microdeck.tools 100% In-Browser

Sheet Metal Bend Allowance Calculator

New

Calculate the bend allowance, outside setback and bend deduction of a sheet metal bend from thickness, radius, angle and K-factor, and the flat pattern length.

100% In-Browser No Server Storage Instant Results

Did this tool save you time? Help keep Microdeck free and maintained. Completely optional · From $3.

How It Works Under the Hood

When sheet metal bends, the neutral axis keeps its length. The arc of that axis is the bend allowance, BA = angle × (R + K × T). The bend deduction is twice the outside setback minus the allowance. Enter two outside leg lengths and the tool returns the flat blank length.

Step-by-Step Instructions

1

Enter thickness, inside radius, angle and K-factor.

2

Optionally enter the two outside leg lengths.

3

Read BA, setback, BD and the flat length.

Key Features & Performance

  • Bend allowance, setback and deduction
  • K-factor guidance
  • Flat pattern length

Methodology, Formulas & Technical Standards

BA = θ(R + K·T); OSSB = (R + T)·tan(θ/2); BD = 2·OSSB − BA.

Worked Examples & Edge Cases

2 mm steel, R 2, 90°

Input
K 0.4
Output
BA ≈ 4.40 mm

Limitations, Scope & Accuracy Notes

  • • K-factor depends on material and tooling; verify with a test bend.

Local Browser Processing & Privacy

Traditional web converters upload your documents, snippets, or media files to remote servers. Sheet Metal Bend Allowance Calculator runs inside your browser tab:

Processed in This Tab

Your input text and files are processed locally without uploading payloads to a processing server.

No Tool Payload Logging

Microdeck does not log or store the files or inputs you paste into tool workspaces (normal static hosting/CDN requests still load page assets).

Tab Memory Lifecycle

Working outputs stay in your browser tab and are released when you reset the tool or close the tab.

Frequently Asked Questions

What K-factor should I use?

About 0.4 for most air bends; adjust after a test.

What angle do I enter?

The angle the metal turns through, 90° for a square corner.

Is data uploaded?

No.

Explore Related Micro-Tools

Support Microdeck

Completely optional · From $3 · No account required

Choose an amount (USD):Selected:$5

Minimum support amount is $3 USD.

Completely optional · From $3 · Checkout opens on Gumroad.