底層運作原理
The time constant τ is the resistance times the capacitance. After one τ a charging capacitor has reached 63.2% of the source voltage; after five τ it is above 99%. The tool shows τ, a table for 1 to 5 τ, the voltage after a time you enter and the time to reach a target voltage.
詳細操作步驟
Enter R and C, using suffixes such as 10k and 100u.
Enter the source voltage and choose charging or discharging.
Optionally enter an elapsed time or a target voltage.
Read τ, the curve table and your specific answers.
核心功能與效能優勢
- SI suffix input (k, M, m, u, n, p)
- Charging and discharging
- Voltage at a time and time to a voltage
- 1 τ to 5 τ table
運算方法、公式與技術標準
Charging: V(t) = Vs(1 − e^(−t/τ)). Discharging: V(t) = Vs·e^(−t/τ). Time to reach V: t = −τ·ln(1 − V/Vs) charging, t = τ·ln(Vs/V) discharging.
實作範例與邊界案例
10 kΩ × 100 µF
R = 10k, C = 100u
τ = 1 s; 63.2% after 1 s
Reach 3.3 V from 5 V
τ = 1 s, charging
≈ 1.08 s
使用限制與精準度說明
- • Ideal components: leakage, ESR and source resistance are ignored.
- • A capacitor never reaches the source voltage exactly; "full" means about 5 τ.
瀏覽器本地運算與隱私保障
傳統線上轉換網站會將您的文件、文字片段或影音檔案上傳至遠端伺服器。RC 時間常數計算器 (Tau = R × C) 完全在您的瀏覽器分頁內運行:
您的檔案與文字都在裝置本機計算,不會傳送內容至任何後端伺服器。
Microdeck 不會記錄或儲存您在工具內貼上的任何檔案或程式碼。
所有暫存結果僅存在目前分頁記憶體中,重設或關閉分頁後即刻清除。
常見問題 (FAQ)
How long does a capacitor take to charge?
About 5 time constants (5 × R × C) to reach more than 99%.
Can I type 4.7k and 100n?
Yes. Suffixes p, n, u, m, k, M and G are understood.
Does it upload my values?
No.