작동 원리 및 구조
The time constant τ is the resistance times the capacitance. After one τ a charging capacitor has reached 63.2% of the source voltage; after five τ it is above 99%. The tool shows τ, a table for 1 to 5 τ, the voltage after a time you enter and the time to reach a target voltage.
단계별 사용 방법
Enter R and C, using suffixes such as 10k and 100u.
Enter the source voltage and choose charging or discharging.
Optionally enter an elapsed time or a target voltage.
Read τ, the curve table and your specific answers.
주요 기능 및 장점
- SI suffix input (k, M, m, u, n, p)
- Charging and discharging
- Voltage at a time and time to a voltage
- 1 τ to 5 τ table
계산 방식, 공식 및 기술 표준
Charging: V(t) = Vs(1 − e^(−t/τ)). Discharging: V(t) = Vs·e^(−t/τ). Time to reach V: t = −τ·ln(1 − V/Vs) charging, t = τ·ln(Vs/V) discharging.
입출력 예시 및 엣지 케이스
10 kΩ × 100 µF
R = 10k, C = 100u
τ = 1 s; 63.2% after 1 s
Reach 3.3 V from 5 V
τ = 1 s, charging
≈ 1.08 s
제한 사항 및 정확도 안내
- • Ideal components: leakage, ESR and source resistance are ignored.
- • A capacitor never reaches the source voltage exactly; "full" means about 5 τ.
브라우저 로컬 처리 및 개인정보 보호
일반 웹 변환기는 문서나 미디어 파일을 원격 서버에 업로드합니다. RC 시정수 계산기 (Tau = R × C) 도구는 현재 브라우저 탭 내부에서만 실행됩니다:
입력 텍스트와 파일은 외부 서버로 전송되지 않고 기기 내에서 로컬로 계산됩니다.
도구에 붙여넣은 파일이나 데이터를 서버에 기록하거나 저장하지 않습니다.
작업 결과는 브라우저 탭 메모리에만 유지되며 탭을 닫거나 초기화하면 즉시 해제됩니다.
자주 묻는 질문 (FAQ)
How long does a capacitor take to charge?
About 5 time constants (5 × R × C) to reach more than 99%.
Can I type 4.7k and 100n?
Yes. Suffixes p, n, u, m, k, M and G are understood.
Does it upload my values?
No.