底層運作原理
The air that must be added, in free-air litres, is the tank volume times the pressure rise divided by atmospheric pressure. Dividing by the compressor delivery gives the time. A derating factor accounts for the compressor slowing down at high pressure.
詳細操作步驟
Enter the tank volume and the start and target gauge pressures.
Enter the compressor free air delivery.
Adjust the derating if you know it.
Read the fill time.
核心功能與效能優勢
- Litres, gallons and cubic feet
- bar and psi
- L/min, CFM and L/s
- Stored free air volume
運算方法、公式與技術標準
Time = V × (P2 − P1) ÷ (P_atm × Q), gauge pressures in the same unit as atmospheric pressure.
實作範例與邊界案例
100 L tank to 8 bar
200 L/min compressor
About 4.4 min
使用限制與精準度說明
- • Isothermal estimate; real fills take a little longer.
- • Use the delivery at your working pressure, not the displacement.
瀏覽器本地運算與隱私保障
傳統線上轉換網站會將您的文件、文字片段或影音檔案上傳至遠端伺服器。空壓機儲氣桶打氣時間與排氣量計算器 完全在您的瀏覽器分頁內運行:
您的檔案與文字都在裝置本機計算,不會傳送內容至任何後端伺服器。
Microdeck 不會記錄或儲存您在工具內貼上的任何檔案或程式碼。
所有暫存結果僅存在目前分頁記憶體中,重設或關閉分頁後即刻清除。
常見問題 (FAQ)
What is FAD?
Free air delivery: air actually delivered, measured at inlet conditions.
Why is the real time longer?
Compressors slow at higher pressure and heat of compression raises the gauge reading.
Is my data uploaded?
No.