작동 원리 및 구조
The air that must be added, in free-air litres, is the tank volume times the pressure rise divided by atmospheric pressure. Dividing by the compressor delivery gives the time. A derating factor accounts for the compressor slowing down at high pressure.
단계별 사용 방법
Enter the tank volume and the start and target gauge pressures.
Enter the compressor free air delivery.
Adjust the derating if you know it.
Read the fill time.
주요 기능 및 장점
- Litres, gallons and cubic feet
- bar and psi
- L/min, CFM and L/s
- Stored free air volume
계산 방식, 공식 및 기술 표준
Time = V × (P2 − P1) ÷ (P_atm × Q), gauge pressures in the same unit as atmospheric pressure.
입출력 예시 및 엣지 케이스
100 L tank to 8 bar
200 L/min compressor
About 4.4 min
제한 사항 및 정확도 안내
- • Isothermal estimate; real fills take a little longer.
- • Use the delivery at your working pressure, not the displacement.
브라우저 로컬 처리 및 개인정보 보호
일반 웹 변환기는 문서나 미디어 파일을 원격 서버에 업로드합니다. 공기 압축기 에어탱크 충전 시간 계산기 도구는 현재 브라우저 탭 내부에서만 실행됩니다:
입력 텍스트와 파일은 외부 서버로 전송되지 않고 기기 내에서 로컬로 계산됩니다.
도구에 붙여넣은 파일이나 데이터를 서버에 기록하거나 저장하지 않습니다.
작업 결과는 브라우저 탭 메모리에만 유지되며 탭을 닫거나 초기화하면 즉시 해제됩니다.
자주 묻는 질문 (FAQ)
What is FAD?
Free air delivery: air actually delivered, measured at inlet conditions.
Why is the real time longer?
Compressors slow at higher pressure and heat of compression raises the gauge reading.
Is my data uploaded?
No.