Microdeck.tools 100% In-Browser

Ohm's Law & Power Calculator

New

Solve V, I, R and P from any two known values. Accepts SI suffixes such as 4.7k, 20m and 100u, and shows results with engineering prefixes.

100% In-Browser No Server Storage Instant Results

Did this tool save you time? Help keep Microdeck free and maintained. Completely optional · From $3.

How It Works Under the Hood

Ohm's law says V = I × R and power is P = V × I. Any two of the four quantities fix the other two, so the tool picks the matching pair of formulas: for example V and R give I = V ÷ R and P = V² ÷ R, while P and R give V = √(P × R) and I = √(P ÷ R).

Step-by-Step Instructions

1

Fill in exactly two of the four boxes and leave the others empty.

2

Use plain numbers or SI suffixes: 4.7k, 2M, 20m, 100u, 10n.

3

Read the two missing values, shown with a unit prefix such as mA or kΩ.

Key Features & Performance

  • All six input pairs supported
  • SI suffix input (p, n, u, m, k, M, G)
  • Comma or dot decimals
  • Clear message if you enter too many or too few values

Worked Examples & Edge Cases

12 V across 470 Ω

Input
V = 12, R = 470
Output
I = 25.53 mA, P = 0.306 W

Heater element

Input
P = 2000 W at V = 230
Output
I = 8.70 A, R = 26.45 Ω

Limitations, Scope & Accuracy Notes

  • • Valid for resistive DC loads. AC circuits with reactance, motors and switching supplies need impedance and power factor.

Local Browser Processing & Privacy

Traditional web converters upload your documents, snippets, or media files to remote servers. Ohm's Law & Power Calculator runs inside your browser tab:

Processed in This Tab

Your input text and files are processed locally without uploading payloads to a processing server.

No Tool Payload Logging

Microdeck does not log or store the files or inputs you paste into tool workspaces (normal static hosting/CDN requests still load page assets).

Tab Memory Lifecycle

Working outputs stay in your browser tab and are released when you reset the tool or close the tab.

Frequently Asked Questions

Why must I fill exactly two boxes?

Two known values determine the circuit. One is not enough, and three would risk contradicting each other.

Does it work for AC?

It works for RMS values with purely resistive loads. Inductive or capacitive loads need impedance and power factor.

What does "m" mean in 20m?

Milli, one thousandth, so 20m amps is 0.02 A. For mega use capital M.

Explore Related Micro-Tools

Support Microdeck

Completely optional · From $3 · No account required

Choose an amount (USD):Selected:$5

Minimum support amount is $3 USD.

Completely optional · From $3 · Checkout opens on Gumroad.