仕組みと内部処理
Ohm's law says V = I × R and power is P = V × I. Any two of the four quantities fix the other two, so the tool picks the matching pair of formulas: for example V and R give I = V ÷ R and P = V² ÷ R, while P and R give V = √(P × R) and I = √(P ÷ R).
使い方ステップ
Fill in exactly two of the four boxes and leave the others empty.
Use plain numbers or SI suffixes: 4.7k, 2M, 20m, 100u, 10n.
Read the two missing values, shown with a unit prefix such as mA or kΩ.
主な機能と特長
- All six input pairs supported
- SI suffix input (p, n, u, m, k, M, G)
- Comma or dot decimals
- Clear message if you enter too many or too few values
入出力の例・エッジケース
12 V across 470 Ω
V = 12, R = 470
I = 25.53 mA, P = 0.306 W
Heater element
P = 2000 W at V = 230
I = 8.70 A, R = 26.45 Ω
仕様上の制限・精度に関するご注意
- • Valid for resistive DC loads. AC circuits with reactance, motors and switching supplies need impedance and power factor.
ブラウザ内ローカル処理とプライバシー保護
一般的なWebツールは文書やメディアを外部サーバーへ送信します。オームの法則・電力計算機 はお使いのブラウザタブ内のみで完結します:
入力テキストやファイルは端末内で処理され、外部の処理サーバーへアップロードされません。
作業内容や貼り付けたデータを保存・記録しません(通常の静的配信CDNリクエストのみ発生します)。
作業データはタブ内のメモリ上のみに保持され、リセットまたはタブを閉じると破棄されます。
よくある質問 (FAQ)
Why must I fill exactly two boxes?
Two known values determine the circuit. One is not enough, and three would risk contradicting each other.
Does it work for AC?
It works for RMS values with purely resistive loads. Inductive or capacitive loads need impedance and power factor.
What does "m" mean in 20m?
Milli, one thousandth, so 20m amps is 0.02 A. For mega use capital M.