작동 원리 및 구조
Wall area is the perimeter times the height, minus doors (about 1.9 m² each) and windows (about 1.4 m² each). Paint = area × coats ÷ coverage, plus the waste percentage. Optionally the ceiling area (length × width) is added. The tool then rounds up to whole tins of the size you enter.
단계별 사용 방법
Choose metres or feet and enter the room length, width and height.
Enter the number of doors and windows, and whether to paint the ceiling.
Enter the number of coats and the coverage printed on the tin.
Enter your tin size to see how many tins to buy.
주요 기능 및 장점
- Metric and US units
- Doors and windows deducted
- Optional ceiling
- Tin count rounded up for the tin size you choose
입출력 예시 및 엣지 케이스
Bedroom
5 × 4 m, 2.7 m high, 1 door, 2 windows, 2 coats, 10 m²/L, 10% waste
9.7 L, buy 2 × 5 L
제한 사항 및 정확도 안내
- • Coverage depends on the paint, surface and roller. Rough, dark or very absorbent walls need more; check the tin label.
- • First coats on bare plaster or a colour change often need a primer, which is calculated separately.
브라우저 로컬 처리 및 개인정보 보호
일반 웹 변환기는 문서나 미디어 파일을 원격 서버에 업로드합니다. 벽 페인트 소요량 계산기 도구는 현재 브라우저 탭 내부에서만 실행됩니다:
입력 텍스트와 파일은 외부 서버로 전송되지 않고 기기 내에서 로컬로 계산됩니다.
도구에 붙여넣은 파일이나 데이터를 서버에 기록하거나 저장하지 않습니다.
작업 결과는 브라우저 탭 메모리에만 유지되며 탭을 닫거나 초기화하면 즉시 해제됩니다.
자주 묻는 질문 (FAQ)
How much does one gallon cover?
Typically 350 to 400 square feet (about 33 to 37 m²) per US gallon, per coat.
Should I count two coats?
Almost always. One coat rarely hides the old colour or gives an even finish.
Does it include trim and skirting?
No. Estimate trim separately, because it usually uses a different paint.