仕組みと内部処理
Wall area is the perimeter times the height, minus doors (about 1.9 m² each) and windows (about 1.4 m² each). Paint = area × coats ÷ coverage, plus the waste percentage. Optionally the ceiling area (length × width) is added. The tool then rounds up to whole tins of the size you enter.
使い方ステップ
Choose metres or feet and enter the room length, width and height.
Enter the number of doors and windows, and whether to paint the ceiling.
Enter the number of coats and the coverage printed on the tin.
Enter your tin size to see how many tins to buy.
主な機能と特長
- Metric and US units
- Doors and windows deducted
- Optional ceiling
- Tin count rounded up for the tin size you choose
入出力の例・エッジケース
Bedroom
5 × 4 m, 2.7 m high, 1 door, 2 windows, 2 coats, 10 m²/L, 10% waste
9.7 L, buy 2 × 5 L
仕様上の制限・精度に関するご注意
- • Coverage depends on the paint, surface and roller. Rough, dark or very absorbent walls need more; check the tin label.
- • First coats on bare plaster or a colour change often need a primer, which is calculated separately.
ブラウザ内ローカル処理とプライバシー保護
一般的なWebツールは文書やメディアを外部サーバーへ送信します。壁塗料の必要量計算機 はお使いのブラウザタブ内のみで完結します:
入力テキストやファイルは端末内で処理され、外部の処理サーバーへアップロードされません。
作業内容や貼り付けたデータを保存・記録しません(通常の静的配信CDNリクエストのみ発生します)。
作業データはタブ内のメモリ上のみに保持され、リセットまたはタブを閉じると破棄されます。
よくある質問 (FAQ)
How much does one gallon cover?
Typically 350 to 400 square feet (about 33 to 37 m²) per US gallon, per coat.
Should I count two coats?
Almost always. One coat rarely hides the old colour or gives an even finish.
Does it include trim and skirting?
No. Estimate trim separately, because it usually uses a different paint.