작동 원리 및 구조
With 3 or 4 digits the last digit is the power of ten: 472 = 47 × 10² = 4.7 kΩ and 1002 = 100 × 10² = 10 kΩ. An R marks the decimal point (4R7 = 4.7 Ω). EIA-96 (1% parts) uses two digits that index a table of 96 values plus a letter multiplier, for example 01C = 100 × 100 = 10 kΩ and 68X = 499 × 0.1 = 49.9 Ω.
단계별 사용 방법
Type the marking from the resistor.
Read the value in ohms and its formatted form.
The tool tells you which scheme it recognised.
주요 기능 및 장점
- All four marking schemes
- Full 96-value EIA-96 table
- Multiplier letters Z, Y/R, X/S, A, B/H, C, D, E, F
- Clear errors for invalid codes
입출력 예시 및 엣지 케이스
3-digit
472
4.7 kΩ
EIA-96
01C
10 kΩ
제한 사항 및 정확도 안내
- • Tiny parts may show no marking. Measure with a multimeter before relying on a decode.
- • A code like 100 can be 10 Ω in 3-digit style; the EIA-96 form always ends in a letter.
브라우저 로컬 처리 및 개인정보 보호
일반 웹 변환기는 문서나 미디어 파일을 원격 서버에 업로드합니다. SMD 저항 코드 해독기 도구는 현재 브라우저 탭 내부에서만 실행됩니다:
입력 텍스트와 파일은 외부 서버로 전송되지 않고 기기 내에서 로컬로 계산됩니다.
도구에 붙여넣은 파일이나 데이터를 서버에 기록하거나 저장하지 않습니다.
작업 결과는 브라우저 탭 메모리에만 유지되며 탭을 닫거나 초기화하면 즉시 해제됩니다.
자주 묻는 질문 (FAQ)
What does 000 mean?
A zero-ohm link (jumper).
How do I tell EIA-96 from 3-digit?
EIA-96 codes are two digits followed by a letter, for example 68X.
Is data stored?
No.