仕組みと内部処理
With 3 or 4 digits the last digit is the power of ten: 472 = 47 × 10² = 4.7 kΩ and 1002 = 100 × 10² = 10 kΩ. An R marks the decimal point (4R7 = 4.7 Ω). EIA-96 (1% parts) uses two digits that index a table of 96 values plus a letter multiplier, for example 01C = 100 × 100 = 10 kΩ and 68X = 499 × 0.1 = 49.9 Ω.
使い方ステップ
Type the marking from the resistor.
Read the value in ohms and its formatted form.
The tool tells you which scheme it recognised.
主な機能と特長
- All four marking schemes
- Full 96-value EIA-96 table
- Multiplier letters Z, Y/R, X/S, A, B/H, C, D, E, F
- Clear errors for invalid codes
入出力の例・エッジケース
3-digit
472
4.7 kΩ
EIA-96
01C
10 kΩ
仕様上の制限・精度に関するご注意
- • Tiny parts may show no marking. Measure with a multimeter before relying on a decode.
- • A code like 100 can be 10 Ω in 3-digit style; the EIA-96 form always ends in a letter.
ブラウザ内ローカル処理とプライバシー保護
一般的なWebツールは文書やメディアを外部サーバーへ送信します。SMD抵抗コードデコーダ はお使いのブラウザタブ内のみで完結します:
入力テキストやファイルは端末内で処理され、外部の処理サーバーへアップロードされません。
作業内容や貼り付けたデータを保存・記録しません(通常の静的配信CDNリクエストのみ発生します)。
作業データはタブ内のメモリ上のみに保持され、リセットまたはタブを閉じると破棄されます。
よくある質問 (FAQ)
What does 000 mean?
A zero-ohm link (jumper).
How do I tell EIA-96 from 3-digit?
EIA-96 codes are two digits followed by a letter, for example 68X.
Is data stored?
No.