작동 원리 및 구조
The liner has to cover the bottom, run up the sloped banks and overlap the edge. The tool calculates the sloped length of the bank from the depth and slope, adds the overlap at each edge and a folds allowance, and reports the length and width, area, weight and cost.
단계별 사용 방법
Enter the pond length, width and depth.
Enter the bank slope and the overlap.
Optionally enter thickness and price.
Read the liner size and area.
주요 기능 및 장점
- Sloped or vertical sides
- Overlap and folds allowance
- Liner weight
- Pond volume
계산 방식, 공식 및 기술 표준
Side = top − 2 × slope × depth + 2 × depth × √(1 + slope²) + 2 × overlap.
입출력 예시 및 엣지 케이스
12 × 8 m pond, 1.5 m deep, 1.5:1 banks
0.5 m overlap, 5% allowance
About 14.3 × 10.2 m
제한 사항 및 정확도 안내
- • Liners come in standard widths; welding may be needed.
- • Use an underlay to protect against stones and roots.
브라우저 로컬 처리 및 개인정보 보호
일반 웹 변환기는 문서나 미디어 파일을 원격 서버에 업로드합니다. 인공 연못 방수포(포드 라이너) 규격 치수 계산기 (EPDM·HDPE) 도구는 현재 브라우저 탭 내부에서만 실행됩니다:
입력 텍스트와 파일은 외부 서버로 전송되지 않고 기기 내에서 로컬로 계산됩니다.
도구에 붙여넣은 파일이나 데이터를 서버에 기록하거나 저장하지 않습니다.
작업 결과는 브라우저 탭 메모리에만 유지되며 탭을 닫거나 초기화하면 즉시 해제됩니다.
자주 묻는 질문 (FAQ)
What thickness is used?
Often 0.5–1.0 mm HDPE for fish ponds.
Why add an allowance?
The liner follows folds and corners.
Is data uploaded?
No.